Welcome to Kunshan qingdeli Precision Mold Co., Ltd.

0512-57168349

CONTACT
Telephone:0512-57168349
Contact: Tu Gang
Contact18049836208  13564995855
Seat machine:0512-57168349
Fax:0512-57168349
Mailbox:gang5855@163.com
Address: Hong Guan million industrial park, No. 88, Rose Road, Lu Jia town, Kunshan

NEWS

Hardware continuous mold inlet pipe.

The working principle of metal continuous mold temperature machine is composed of water tank, heating cooling system, power transmission system, liquid level element control system, temperature sensor and injection port.

The working principle of mould temperature machine is composed of water tank, heating cooling system, power transmission system, liquid level element control system, temperature sensor and injection port. Normally, the pump in the power transmission system gets the fluid from the tank containing the built-in heater or cooler to the mold, and then from the mold to the tank; The temperature sensor measures the temperature of the fluid and transfers the data to the controller in the control part; The controller regulates the temperature of the fluid, thereby indirectly adjusting the temperature of the mold. If the mold temperature exceeds the set value of the controller in the production, the controller will open the solenoid valve to connect the external inlet pipe until the temperature of the fluid; The temperature of the die returns to the set value. If the mold temperature is below the set value, the controller will turn on the heater.